Skip to main content
A pool and spa lit in pink and blue LED light at dusk
Repairs and install

Pool lights out? We find out why.

A pool or spa light that works again, with a clear answer on bulb, fixture or wiring, plus LED conversion. Montgomery and Chester Counties.

A pool light that works again, and a clear answer on whether the bulb, the fixture or the wiring was the problem, so you pay for the right fix. August Pool & Spa replaces bulbs and fixtures, converts pool and spa lights to LED, and troubleshoots the wiring across Montgomery and Chester Counties.

Service
Pool and spa light repair, replacement and LED conversion
Where
Montgomery and Chester Counties, PA
Phone hours
Monday to Saturday, 9 AM to 6 PM
LED energy use
About 85% less electricity than standard lights
Estimates
Free; most need a site visit

Pool Lighting, in plain terms.

You get a pool light that works again, and you find out whether the problem was the bulb, the fixture or the wiring, so you do not pay for the wrong part. When a light goes out, the cause is not always the bulb. It might be the fixture, the cord, the GFCI (the safety outlet that cuts power when it senses a fault) or the wiring between the controls and the light.

If the bulb has blown, we can often put a new bulb and gasket in the existing fixture, and you get the light back without a bigger job. If the fixture is full of water or the cord is damaged, the fixture has to be replaced. We take out the old one, set the new one in the niche (the housing the light sits in) and test it, so the new light works and the old problem is gone.

LED lights are worth a look. We offer LED fixtures for most standard pool light niches. They use about 85% less electricity and the bulbs last much longer. We also offer LED bulbs that fit standard fixtures, so you can upgrade without replacing the whole fixture.

If your old lighting no longer works, or it never worked well, an LED conversion may be the answer. We have options from several manufacturers for converting older lights to LED. The result is a pool and spa that light up reliably and cost less to run.

Wiring troubleshooting covers the cases where the light is fine and something else is wrong. The problem may sit in the GFCI or in the wiring between the controls and the light. Our technicians test these carefully and recommend the next step for your situation.

Pool lights sit in water and run on electricity, so we ask you to stop using a light that trips a breaker or shows water inside it. Call us and describe what you see. We handle the diagnosis from there.

How it goes.

  1. Tell us what the light does Use the form or call (267) 280-3657. Dark, flickering and tripping a breaker are all useful details.
  2. We test the cause A technician checks the bulb, fixture, cord, safety outlet (GFCI) and wiring until the fault is clear.
  3. You choose Replace the bulb, replace the fixture or convert to LED. Estimates are free and most need a site visit.
  4. We install and test The light is secured in the niche and tested before we leave.

Pool Lighting: questions people ask first.

Is it just the bulb?

Sometimes. If the bulb has blown, we can often install a new bulb and gasket in the existing fixture. If the fixture is full of water or the cord is damaged, the fixture has to be replaced. If neither, the problem may be in the GFCI (the safety outlet that cuts power when it senses a fault) or the wiring.

What will it cost?

It depends on whether the fix is a bulb, a fixture, an LED conversion or an electrical repair. Estimates are free, and most need a site visit so we can see the light and wiring.

Is LED worth it for my pool?

LED fixtures use about 85% less electricity and the bulbs last much longer. They are made for most standard pool light niches, and LED bulbs are also available for standard fixtures.

Can you convert my old lights to LED?

Yes. If your old lighting no longer works or does not work well, we can convert it to LED. We have options from several manufacturers.

Do you handle spa lights too?

Yes. We repair and replace both pool lights and spa lights. That includes bulbs, fixtures, LED conversion and troubleshooting of the GFCI and the wiring behind the light. Tell us what the light does when you call.

My light keeps tripping the breaker. What should I do?

Stop using that light and call us. The problem may be in the fixture, the GFCI or the wiring, and our technicians troubleshoot all three.

Where we do it.

Pool Lighting is available across Montgomery and Chester Counties. These towns have their own pages, with local pool permit and fence rules.

Often booked with this.

Tell us what the pool is doing.

Send a request or call the shop. Estimates are free; most need a site visit.